Pre-Wetted Laser Sealed Polyester Wiper - 90% Isopropyl Alcohol/10% Deionized Water 9"x9" Pail
SKU: # AVTPNWLSI90-99
Valutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from traditional solvent bottle dispensers, spray and spills. All Valutek pre-wetted wipers are assembled in a Class 10 cleanroom under Valutek inspection and strict process control to ensure Valutek quality standard and product specifications.
- 90% Isopropyl Alcohol, 10% Deionized Water
- Size: 9" x 9"
- 100% continuous filament, double-knit polyester fiber
- Laser sealed (thermally sealed) edge for reduced fiber contamination
- Pre-wetted with specified IPA/DI Water concentrations to a 38% saturation level
- Available in both reusable pail packaging and refill pack packaging
- The pre-wet solution increases both cleaning efficiency and cleaning protocol consistency
- Very low levels of particles, fibers, ions and extractables
As part of the Valutek Nanotek product family, this product is recommended for use in a cleanroom Class 1-10 (ISO 3-4) critical environment. It is designed for use in wet cleaning of critical surfaces where control of flammable solvents and flammable solvent concentrations is required. Various IPA blend levels are ideal for removing different cleaning and disinfecting residues in regulated environments.